| Your garbage disposal is a part of the plumbing | | | | any debris that is causing the blockage or tighten all |
| system that sometimes can have problems. Although | | | | connections to prevent leakage. Sometimes there is |
| it's easy to get rid of the unwanted wastes found in | | | | a call to replace the pipes because there are clogs |
| it, you still get frustrated when the device itself | | | | that cannot be removed. And to make sure there will |
| breaks down. However, repairing your garbage | | | | be no more leaks, you replace the seal and the drain |
| disposal is not as difficult as you think it is. You can | | | | gasket. |
| actually fix it on your own with ease. Let's learn the | | | | If the problem is due to the circuit breakers or the |
| ways on how to fix your garbage disposal. | | | | flywheel, you only need a few certain steps to fix it. |
| Before you get down into the business of repairing | | | | For the circuit breakers, check if the panels have |
| your disposal, you must know the dos and don'ts of | | | | been turned off and if so just flip the switch and |
| it. Remember that the disposal has a motor and a | | | | reset the disposal. If it's due to the flywheel, you |
| blade underneath the drain which you must be aware | | | | have to apply a hex wrench and rotate it until the |
| of. So, you must be careful first by unplugging all | | | | flywheel is loosened. |
| parts before you do the repairing process. | | | | These are the things you must do to fix your |
| First, you need to check your disposal for whatever | | | | garbage disposal. Take note that you have to check |
| is causing the damage that you need to repair. It | | | | first what is causing the problem so you will be able |
| may be due to clogs or leaks. You also check if the | | | | to easily fix it. And most importantly, remember to |
| circuit breakers have tripped or the flywheel has | | | | stay careful at all times whenever you repair the |
| been stuck. | | | | problem. |
| To repair clogs or leaks, you only need to remove | | | | |