Saniflo Problems and How to Avoid Them

The very best way to avoid Saniflo problems is atoilet overflow leads back into the loo bowl, always
two step process. The first step is to ensure youmake sure to fix any overflow problems immediately,
have a good installation that at the very leastand the same goes for your taps that drain off in to
conforms to all 10 of the Saniflo 10 golden rules, ifthe macerator, always fix leaky, drippy taps
your installation does not meet even 1 of theseimmediately, both the overflow from the loo and
golden rules, your Saniflo could very easily give youdrippy taps will fill the macerator over a short periods
long term problems. You can find a copy of Saniflo -of time, the Saniflo will sense the water and empty
10 golden rules at their website in the downloadsitself, and this would keep going on and on, one
section.symptom you might notice is the Saniflo becoming
The second step to avoid Saniflo problems is inactive when no one is using the loo, the problem with
regard to the use of the Saniflo and are as follows.this is that it will cause parts in your Saniflo to burn
out prematurely due to over use.
1. Do not allow any thing that should not enter the3. Do use the Saniflo de-scaler cleanser as described
macerator to enter the macerator, Saniflo units areon the packet, this product was specifically created
designed for the disposal of normal organic wastefor use with all Saniflo products and can prolong the
product, water or paper. They are not intended tolife of your Saniflo unit as well as clean and disinfect
replace kitchen waste or sanitary waste disposalthe inside of the Saniflo.
units. Anything else entering the macerator can causeThe 3 points in the second steps to avoid Saniflo
a blockage in the Saniflo or pipe work or even causeproblems are based purely on my own observations
the motor to burn outand have nothing to do with Saniflo the company.
2. If your Saniflo is connected to a toilet and the